Circulation ventilation purification blow-suction type centralized workshop dust removal system

In the process of modern industrial production, smoke pollution has become an unavoidable problem. Especially in the welding workshop, welding parts always produce a lot of smoke, which not only poses a threat to the health of the workers, but also affects the environmental quality of the workshop. For large workshops with multi-station, complex working conditions and the need for crane lifting, in order to find a Welding Fume Extractor with good dust removal effect, without affecting daily production and operation, and taking into account the fitness of plant design, Moland recommends a Blow-suction Fume Extraction System.

The blowing and suction type dust removal system is a ventilation airflow composed of blowing air and suction air, so it is a dust removal method that can effectively control the diffusion of pollution sources.

The Blow-suction Fume Extraction System method is to set the air outlet on the two span center column or the single span side column (wall), and install the air suction port on the opposite wall column to form a circulating air flow, drive the smoke and dust into the Dust Collector, and carry out the overall dust removal and purification of the smoke and dust in the workshop. This system occupies a small area and has obvious purification effect. It is suitable for dust and smoke purification in more complex production workshops.

The centralized Blow-suction Fume Extraction System is not directly targeted at the smoke producing part, so the dust removal system is not affected by the size of the welding workpiece and the change of the welding station.

1. The centralized blowing-suction dust removal system is not limited by the size of the workpiece

The dust collector is arranged along the two sides of the workshop, and the clean air is blown out by air duct. There is no traditional front-end collection device, so it is not affected by the workpiece.

2. The centralized Blow-suction Fume Extraction System does not affect crane hoisting

The dust removal system pipe can be selected higher or lower than the driving height according to the need, and is not affected by the lifting of the driving.

3. Smoke removal and dust removal clean thoroughly

The Industrial Dust Collectors adopt the flame retardant film coated polyester fiber Cartridge Filter to deal with the dust pollution. The dust filter accuracy is 0.3 micron, and the dust removal efficiency is 99.9%, which meets the environmental assessment standard.