Advantages and Precautions of Grinding Dust Extractor

The Grinding Dust Extractor is widely used in various dust removal systems in metallurgical, mining, refractory and other industries. When used, the grinding cleaner purifies the dusty gas with no corruption and temperature below 300 during operation, which is especially suitable for places with high dust concentration. In the process of polishing and polishing, dust will fly under the influence of the guided air flow. If there are no appropriate protective measures, It will seriously endanger the health of operators, so it is necessary to install purification equipment in the operation area to provide clean air for the operation environment. Now, let's learn about the advantages and precautions of Grinding Dust Extractor

Grinding Dust Extractor can effectively purify viscous dust to a certain extent, and the effect is better when used. When used, non hydrophilic dust has higher dust removal efficiency than ordinary wet dust collectors. Direct dust absorption and purification treatment in this workstation is an effective method to control this pollution at present. Grinding and dust removal equipment not only plays a role in protecting the health of operators, but also protects the environment.

When the Grinding Dust Extractor is used, the system is mainly suitable for the polishing and polishing of all kinds of wood, metal, resin, etc. and all kinds of workplaces with high dust concentration. Abrasive Dust Collector is suitable for use with multiple abrasive tools and sanding equipment, with high dust collection efficiency.

Precautions for the use of Grinding Dust Extractor
1. After the Grinding Dust Extractor is used every day, the filter bag needs to be cleaned in time. If it is not cleaned for a long time, the filter will be blocked, and the air volume will be reduced. The blockage will also affect the overload operation of the suction motor, which is easy to heat and burn.
2. During the operation of Grinding Dust Extractor, it is necessary to develop the habit of regularly cleaning the suction impeller. If it is not cleaned for a long time, the dust will adhere to the impeller and block the gap between the impellers. The vibration of the impeller, the reduction of air volume, the increase of noise and so on are easy to cause the motor to heat up and burn out.
3. The Grinding Dust Extractor needs to confirm the rotation direction of the motor to a certain extent. To a certain extent, it can refer to the icon of the arrow direction pasted outside the fan. If the arrow is not pasted, it rotates counterclockwise (for example, the attraction of inaccurate rotation is only 30%).
4 the Grinding Dust Extractor needs to have the same diameter as the air outlet of the exhaust fan, and the pipe should be rotated as much as possible to avoid the reduction of air volume.