Three - How to use and maintain the mobile welding fume purifier correctly?

The modern environmental safety state of affairs is turning into greater and greater severe, and the software of environmental safety dirt elimination gear is turning into extra and greater extensive, specifically in factories with welding processes. In order to manipulate welding fume, most of them are outfitted with welding fume purifiers, however in the course of the true operation of the equipment, due to failure to pay interest to the small print of the operation, disasters occurred, ensuing in typical substitute of parts.

How to use and maintain the Mobile Fume Extractors correctly?

Maintenance of Welding Mobile Fume Extractors

1. The cartridge Filter Element is an important part of the equipment, and it needs to be cleaned regularly to prevent the cartridge Filter Element from clogging and affecting the dust collection effect. If some special smoke and dust need to be dealt with, the operator should adjust the maintenance cycle and method of the Industrial Fume Extractor by himself.

2. Clean the surface of the Industrial Dust Collector every day to ensure that the body is clean, and often remove the adhered dust, dirt and other sundries.

3. When cleaning the main Filter Element, do not use too much force to deal with the surface of the filter material and the filter element gasket, otherwise it will affect the filtration accuracy and sealing of the equipment.

4. Always check the airtightness of the welding Mobile Fume Extractor, and repair it in time if any air leakage occurs.

5. When the used Mobile fume extractor is not used temporarily, the Filter Element must be removed and cleaned. Remove all dust accumulated in the Industrial Fume Extractor, store it properly, and place it in a dry room to avoid sun and rain.

6. Regularly add lubricating oil to fan bearings and other systems every year to reduce system noise and prolong the service life of fans.