Industrial Dust Collectors for production workshop, welding workshop ventilation dust removal system design, higher dust removal efficiency of welding workshop dust catcher equipment using,
Cartridge Filter cartridge pulse
Dust Collector inlet, filter cartridge, outlet, air bag, pulse control meter, the injection valve, spray torch and so on, the filter cartridge is composed of polyester folding, coiling, its bottom end closed, the mouth under the spray torch. After the dust-containing gas enters the dust collector through the air inlet, the air velocity slows down, the coarse particles break away from the air flow and settle into the dust collecting room, the fine dust passes through the filter cylinder with the air flow and is blocked on the outer surface of the filter cylinder, and the clean gas is discharged from the air outlet.
Online cleaning, simple structure, convenient maintenance. Imported filter material, can meet the strict environmental protection emission requirements. According to the installation mode, the filter can be divided into inclined plug type, side mounted type, lifting type and loading type. Filter cartridge material, can be divided into long fiber polyester filter cartridge, composite fiber filter cartridge, anti-static filter cartridge, flame retardant filter cartridge, membrane coated filter cartridge, nano filter cartridge, etc.
The equipment is small and can be placed in the workshop. When the dust layer on the surface of the filter cylinder is thick, the pulse controller sends out a command to open the injection valve, the compressed air in the air bag is ejected at high speed through the jet pipe, and the surrounding air several times as much as the injection volume is induced into the filter cylinder, and the dust on the outer surface of the filter cylinder is blown down into the dust collection room, and then discharged by the ash bucket. The dust collector adopts the pulse blowing method, which not only achieves the complete dust removal, but also does not harm the filter cartridge, so that the service life of the filter cartridge can be guaranteed. The dust removal process is automatically controlled by the pulse controller, and can be controlled by pressure difference or interval control.
1, the filter cylinder assembly structure is different from the LL type inclined plug drawer type, but the vertical assembly structure. Its advantages are: small footprint; The cleaning efficiency of pulse jet is 25 ~ 30% higher than that of LL type inclined plug drawer structure, so that the efficiency of filter barrel with the same area unit is 25 ~ 30% higher.
2, the Industrial Dust Collectors is equipped with: pressure reducing valve, high pressure air bag, conical dust bucket, etc.
3, the use of light steel structure, steel consumption is only 50 ~ 60% of LL type, so can greatly reduce the cost and price, at the same time because of the light weight, especially suitable for the roof or floor placement.
4. Adopt side air inlet structure, which can greatly reduce the space occupied by Industrial Dust Collectors installation.
Shandong Moland Environmental Tech Co.,Ltd
