Jinan Moland Environmental Protection Co., Ltd. Regular return visits to customers

First of all, communicate with the field operators to understand the operation of the Industrial Dust Collectors, and master the equipment information to start the formal inspection process.

The first priority is to check and confirm whether the dust removal devices are working normally.

It is necessary to first check whether the Welding Fume Exhaust System can work normally and start, whether the equipment has abnormal alarm, and the air volume, which affects the use of the equipment, so it is listed as the primary inspection item.
Second, check whether there is air leakage in the housing door frame.
A small amount of air leakage leads to energy loss and wind strength weakening, accelerating the wear and aging of equipment. A large amount of air leakage causes the system pressure to be unable to meet the use demand, thus causing the failure. Third, check whether the noise of motor running current and voltage is normal.
Whether the power supply phase loss, motor circuit breaker tripping after reaching the setting current, motor reversal, fan noise is too large and other problems, is also the focus of inspection.
Fourth, replace the filter consumables.
According to different working conditions, we can customize and match the most suitable filter materials, and different levels of filter elements can effectively filter dust to reduce the pressure loss of the Laser Marking Fume Extractors system. It is recommended to replace the filter element once a year.
Finally, clean and wipe to ensure that the dust removal equipment has a clean appearance and is free of dust, stains or corrosion.

In addition, Moland after-sales staff will also check whether the environment in which the dust removal equipment is located is suitable for its normal operation, including the circuit, placement, etc.

For each patrol inspection, the after-sales staff of MOLAND will fill in the faithful after-sales record sheet for follow-up tracking and reference. If any major hidden danger is found during the inspection, we will report it immediately and try our best to cooperate with the on-site needs to ensure that the daily work of customers will not be affected.
The purchase is never the end of the partnership, rather, it is the beginning of a longer service. Every second, tens of thousands of Moland dust collectors are dedicated to helping the environment.

Today, the first batch of Moland Welding Fume Exhaust System has been in operation at the customer site for more than 5 years, and is still efficient and stable. Moland after-sales staff ensure their proper operation. Regardless of the cold heat, always in the various places. Moland continues to specialize in the innovative research, development and market application of purification technologies to help the development of national environmental protection.