Industrial Filter Dust Collector

The arrangement of the filter cartridge in the Dust Collector is very important. It can be arranged vertically on the pattern board of the box, or it can be arranged obliquely on the pattern board. From the perspective of the cleaning effect, the vertical arrangement is more reasonable. The lower part of the flower plate is the filter chamber, and the upper part is the air box pulse chamber electronic pulse blowing dust vibrating device. The compressed air is instantly sprayed from the exhaust port of the solenoid valve to form a strong airflow, and the dust covering the surface of the filter cartridge is blown back to the collection. The backflushing interval and backflushing cycle can be set for automatic backflushing and cleaning of the filter cartridge. For the collection of various types of dust such as dust, viscosity, dryness and wetness, the PLC program of the dust collector controls the electromagnetic pulse valves to open one by one, and the compressed air flows into the filter cartridge through the induction nozzle in a very short time, so that the filter cartridge expands and deforms to generate vibration, and Under the action of reverse airflow, the dust adhering to the outer surface of the filter cartridge is peeled off and falls into the ash hopper.
The overall treatment of industrial plant waste gas, flue gas and dust has always been a global problem.

Through introduction, absorption, integration and improvement, Shandong Moland Environmental Tech Co., Ltd. has successfully developed a special Industrial Dust Collector for industrial plant waste gas and flue gas dust treatment. There are many types of industrial vacuum cleaners in the market, and there are many forms of use, but Few people use industrial vacuums correctly. The wrong use of industrial vacuum cleaners will not only reduce the life of the equipment, but also may cause safety hazards over time.