Dust purification system in the pharmaceutical production process

The pharmaceutical industry is a very demanding industry, and pharmaceutical companies also have certain requirements for dust collectors! Require the use of recycled dust, which are required to configure a special filter. The following figure shows some common working conditions in the pharmaceutical industry. Normally, a Dust Collector is required to prevent the spread of dust or waste of dust!

Due to the need to use vibration to make the material particles move on the screen surface, allowing particles of different sizes to fall at different screen holes to complete the material particle classification, the drugs are also prone to dust in the end cover of the vibrating screen and the discharge opening.

After the screening is completed, the products are usually packaged, and a lot of dust will overflow during weighing and sealing, which will pollute the workshop environment.

For the discharge opening, weighing, sealing, etc. of the vibrating screen, a side Suction Hood can be designed at the operating height, and the dust can be pumped to an Industrial Dust Collector for purification treatment through a food-grade flexible hose.

Generally, 304 stainless steel should be used for dust collectors, pipes and dust collectors in pharmaceutical factories.

For the powder to be recycled, 304 stainless steel dust collector and food-grade hose can be selected to realize the recycling and reuse of the powder, turning waste into treasure for pharmaceutical companies and creating more value.

www.sdmoland.com

Tel:1+86 18615628278

Whatsapp/Skype:+86 18615628278