Central dust purification system

The central dust purification system is a kind of purification and dust removal equipment suitable for multi station dust treatment and collection of manufacturers. Through the cooperation of smoke capture, pipeline, host and fan, the dust generated by welding can be collected and transported to the main filter room for purification, which is efficient and convenient, and can significantly improve the purification efficiency of welding smoke.
The central fume purification system is different from the mobile Welding Fume Purifier. The specifications of the central dust purification system are not fixed. All components are customized according to the actual situation of the workshop. Before designing the central soot purification system, the manufacturer of the welding fume purifier must know the length and height of the workshop, the position and type of welding machine, and estimate the total output of welding fume.

Then according to the actual working position to determine the size of the dust cover and the direction of the pipe. The number of filter cartridges required is calculated by estimating the filter area required for the amount of welding smoke. The air volume must also be calculated in an overall way to ensure that each opening of the fume purification system has sufficient air volume to collect welding fume.

Through customization to meet the actual working conditions of the workshop, the final dust removal effect of the workshop is optimized among various welding smoke purifiers, which can be used in multiple stations at the same time to improve work efficiency. This is the incomparable advantage of mobile welding fume purifier.
In the emission of smoke and dust, the smoke and dust purification system has a 15 meter discharge pipe, which is used for the emission of smoke and dust at high altitude. It is in line with the recent tough regulations of the environmental protection department on the organization, and can help the factory pass the environmental protection inspection smoothly
However, due to the central dust purification system is used for multiple stations at the same time, the fan power is high, the operation power is large, and the follow-up cost is high. Therefore, in order to save resources, the latest purification system uses variable frequency fan with automatic control system. Through the automatic valve installed at the opening, the welding smoke is sensed, and the signal is transmitted to the control system, and the control system sends commands to control the frequency conversion of the automatic fan.
This kind of dust removal equipment can adjust the operation mode of fan air volume according to the actual use of welding conditions, which can save a lot of operating costs and is very economical for the factory.